Custom Doors Richmond Hill
Custom Doors Richmond Hill | Built By a Small Crew, Not a Mass Developer
Richmond Hill is full of big builder homes and even bigger condo towers, and a stock entry door gets lost in that. We manufacture and install every door ourselves, about 25 minutes away in Whitchurch-Stouffville.
- Manufactured about 25 minutes away in Whitchurch-Stouffville, not mass-produced for a developer
- Sized for everything from Mill Pond heritage homes to Bayview Hill's wide entrances
- Real pricing starting at $2,500, no vague ballpark quote
- HomeStars Verified with a lifetime warranty on the fiberglass
- One team, start to finish, no dealer network in between
Get Your Quote Now
What We Manufacture
From heritage two-storeys near Mill Pond Park to the newer planned streets of Jefferson, we build every front and back entry door to match your home's real opening. Every door leaves our workshop in solid fiberglass, finished the way you picked it, never pulled off a shelf.
Custom Front Doors
Your front door has to hold its own in a market full of big builder homes and even bigger developments going up around it. We build it in solid fiberglass to your exact size, in finishes from Oak Grain and Mahogany Grain to Smooth and Contemporary.
Custom Full-Glass Front Door with Sidelights
Custom Back Doors
Larger lots around Mill Pond and Bayview Hill mean a back door sees constant use for the yard and the deck. We build it from the same solid fiberglass as our front doors, sized to your opening and finished to hold up to daily use.
Custom Back Door
Why Richmond Hill Homeowners Choose EHI Custom Doors
Richmond Hill is in the middle of one of the biggest building booms in York Region, and it is easy for a homeowner's actual entry door to get treated like an afterthought in a market that size. We treat it as the main event.
Built By a Small Team, Not a Mass Developer
Dozens of highrise and condo projects are going up in Richmond Hill at once. Your door does not come off a developer's assembly line, it gets built specifically for your home by a small crew in Whitchurch-Stouffville.
Right at Home Around Mill Pond
Mill Pond's heritage homes sit on some of Richmond Hill's largest, oldest lots, many backing right onto the park and its walking trails. We build to the real opening on a home like that instead of pushing a standard size that does not fit.
Clear Pricing in a Market Full of Guesswork
With detached home prices well past a million dollars in Richmond Hill, it is easy to assume a custom door is priced the same vague way. Ours is not. Single doors start at $2,500 installed, double doors start at $5,100.
Our Services
Every Richmond Hill order goes through the same three steps under one roof in Whitchurch-Stouffville, so there is no separate manufacturer, installer, and sales office to coordinate between.
Door Manufacturing
Your Richmond Hill door starts as raw fiberglass at our Whitchurch-Stouffville workshop and comes out shaped and sized for your exact opening, not picked from a warehouse shelf.
Get Your Door ManufacturedDoor Installation
The crew that installs your door is the same crew that built it, so nothing changes hands between a factory and a subcontractor on install day.
Get Your Door InstalledDoor Replacement
If your current door is warped, drafty, or has been patched up one too many times, we replace it with a custom fiberglass door built for your real opening, not a generic stock size.
Get Your Door ReplacedWhat Makes an EHI Door Different
Every door we build for a Richmond Hill home shares the same foam core and moisture barrier, which is why we can back it with a lifetime warranty on the fiberglass. Here is what actually goes into it.
CFC-Free Polyurethane Foam Core
Every door is built around a CFC-free polyurethane foam core, giving roughly six times the insulation of a plain wood door, which counts for something across a full Richmond Hill winter.
Tongue-in-Groove Moisture Barrier
A tongue-in-groove rail system with composite PVC rails keeps every seam sealed against water. No warping, no swelling, no rot creeping in from melting snow.
Lifetime Fiberglass Warranty
Fiberglass will not crack, rot, or break down the way wood and steel eventually do, so every door we build carries a lifetime warranty on the fiberglass itself.
Multipoint Lock System
Every door comes standard with a multipoint lock engaging the frame at several points instead of one deadbolt, in finishes like satin nickel, oil rubbed bronze, and matte black.
How It Works
A new entry door for your Richmond Hill home does not start with a pushy sales appointment. It starts with a photo and a form, and stays simple the whole way through.
Request Your Digital Quote
Send a few photos of your entrance or fill out our online form and you will hear back with an accurate digital quote and some design direction, no appointment required.
Choose Your Perfect Design
Work with our team to lock in the door style, glass, finish, colour, sidelights, and hardware. Pricing updates as you make each choice.
Approve Your Quote
Once the design and the number look right, approve the quote. Skipping the in-home sales rep is what keeps that number honest.
Final Measurement Visit
After your quote is approved, one of our installers visits your Richmond Hill home to take exact measurements before manufacturing starts.
Custom Manufacturing and Professional Installation
Your door gets built specifically for your home, then installed by our own crew, with a full check before we leave to confirm everything opens, closes, and locks right.
Door Styles That Fit Richmond Hill Homes
Richmond Hill's low-rise streets split a few different ways. Mill Pond keeps its heritage character close to the park, Bayview Hill and Oak Ridges run wider and newer, and Jefferson was planned with one consistent look from street to street.
Classic Panels for Mill Pond's Heritage Streets
Around Mill Pond Park, two-storey homes and bungalows on generous lots call for a door with real panel depth, like an Oak Grain or Mahogany Grain finish, rather than a flat modern slab.
Wide Entrances for Bayview Hill and Oak Ridges
Bayview Hill's larger lots and Oak Ridges' newer builds both tend to run wider than the Richmond Hill average, and we build to that actual width instead of a standard size chart, whether that means a double door or full sidelights.
Consistent Modern Lines for Jefferson
Jefferson was planned with the same architectural standards street to street, and homeowners there tend to want a door that matches that considered look, usually a smooth panel design in a dark modern finish.
Real Pricing, No Guesswork
No guessing games in a market where everything already feels expensive. Here is a real starting point for a new custom fiberglass door installed at a Richmond Hill home.
Single Door
A single custom fiberglass door for a Richmond Hill home starts at $2,500 installed, backed by a lifetime warranty on the fiberglass. The final number depends on size, glass, finish, and hardware like a single point versus multipoint lock.
Double Door
A double door, sized for a wider Richmond Hill entrance like the ones common in Bayview Hill, starts at $5,100 installed. The same factors that shape a single door price apply here, scaled across two panels.
Serving Richmond Hill From Our Whitchurch-Stouffville Workshop
Our workshop is not in Richmond Hill, it is out in Whitchurch-Stouffville, about 22 kilometres and roughly 25 to 30 minutes down Highway 404 depending on traffic.
That drive is short enough that the same small team building your door also handles the install. No regional dealer network, no subcontractor added into the process.
Awards & Recognition
Efficient Home Improvements, the company behind EHI Custom Doors, won a HomeStars Best of Award in 2021 and has held HomeStars Verified status every year since, renewed annually on real customer reviews and a background check.
Get Your Custom Exterior Door Today in Richmond Hill, Ontario
Whether you need a front door, a back door, or both, our team at 4261 Bloomington Rd can build it for your Richmond Hill home. Call us at 647-952-2311, or request your quote now!
Nearby Areas We Serve
Richmond Hill covers a lot of ground, and we build and install across all of it, including:
What Our Customers Say
Don't just take our word for it. Here's what homeowners across Toronto and the GTA are saying about their EHI Custom Doors experience.
Excellent
Frequently Asked Questions
How much does a custom door cost in Richmond Hill?
A single custom fiberglass door starts at $2,500 installed, and a double door starts at $5,100 installed. The exact number moves with size, glass, finish, and hardware, but those two figures are the real starting point.
Is a custom door worth it in a neighbourhood full of big builder homes?
It tends to matter more, not less. A builder-grade door is one of the few things that looks the same on every house on the street, and a custom fiberglass door is an easy way to stand apart without a full renovation.
Do you install doors in condos and townhome developments, or only detached homes?
We build and install front and back entry doors for detached and semi-detached homes. Condo and townhome unit entrances are usually governed by the building's condo corporation, so check with your management office first if that is your situation.
A custom door in Richmond Hill should not get lost between a heritage two-storey near Mill Pond and a brand new build in Jefferson. EHI Custom Doors manufactures, installs, and replaces fiberglass front and back entry doors from our own workshop in Whitchurch-Stouffville, about 25 minutes down Highway 404.
Every door carries a lifetime warranty on the fiberglass, gets priced honestly from the first quote, and is installed by the same team that built it. If you want a door built for your actual home instead of a standard size, call us at 647-952-2311 or fill out the form above for a free quote.